Page 4
1 2 3 4 5 6 7
Containers
Kit Matrix
Custom & Shell
Slip & Slide
Dip & Dunk
Reverse Flow
AirPaths & Liners

Chapter 1: The Matrix
Selecting and/or Creating Lifecasting Containers.

Slip & Slide:

This happens in slippery containers, particularly at thin ratios and in a long or deep LifeCast™. It is crucial anytime you want to make sure a matrix set up will work as intended.
The mold is flexible, right? If your design is made of a hand for example, when the hand is removed most of the empty space in the mold will be where the fingers were - at the bottom.
All the weight of the mold is above the fingers and, if not firmly bonded somehow to the matrix the mold will slide down, compressing the finger areas. This results in a flattened LifeCast™ in that area when the cement is poured.
AA life cast slpsldTo prevent this make sure to glue something rough inside the matrix. Burlap can be used or, my favorite is the self adhesive Velcro® strip (shown in blue). Both the hook and the loop sides work fine. Attached them every few inches all around the inside of matrix.
Also notice that the matrix in this illustration is an inverted taper, with the wide end at the bottom where the most space is needed. This arrangement not only reduces the amount of medium needed but, reduces the weight above the fingers as well.
Copyright © 1987 through 2003 by MSWinn. Thank you for visiting www.lifecast.net!
ToP
1/18/03

LifeCast™ & MSW Creative Works Legal Information:

Contents of this web site (lifecast.net) and all life cast materials and other art and sculpture products or lifecast kit packaging, art techniques and sculpture instructions copyright © 1986-2002 by Mark S. Winn. All rights reserved. The terms BODY PARTS™, LifeCast™, ChildCast™, StudioPack™, ArtForm™, ArtCast™, Earthium™, Earthium(f/x)™, ShrinKast™, PolyART™, WaterTrap™, BlendBag™, Successful Creativity Guarantee™, LifeMask™, FastMask™ as well as the phrase "Make YourSelf Immortal!™" and any other art materials product or craft item denoted by a small 'TM' (such as in LifeCast™) are trademarks. The phrases life cast and life casting or the words lifecast and lifecasting are generic.
Our LifeCast™ products or other sculpture, mold making and art materials products are are entirely safe within the context of arts & crafts when used as directed. Other arts & crafts materials shown here each carry their own warnings and degrees of safety. They are available for use as creative mediums AT YOUR OWN RISK and since we cannot control the actual use of these art products, we disclaim any responsibility for damage or injury caused by incorrect or experimental life cast, sculpture, life mask, erotic art or other mold making or creative applications.
NOT FOR USE BY CHILDREN: These arts & crafts materials may be used with children of any age but should never be used by an unsupervised child. A "child" is defined by law as anyone under the age of 18 years. Our art, lifecast or sculpture product prohibitions against unsupervised use by children therefore applies to all persons under that age. "Supervised" by definition means at all times, through each step of any use of our life cast or other art materials. Such supervision must be by an adult over the age of 18 years while using the BODY PARTS™ LifeCast™ kits or other life cast, sculpture and art materials.
Our life cast, sculpture and other art materials should never be used by anyone who cannot read, understand and apply the language in which the lifecast, sculpture or art materials' instructions appear. The terms of said language are exclusively defined in any standard, widely accepted and comprehensive dictionary of that language and are meant to be construed in no other manner.
Purchase and/or use of our life cast, sculpture or other art materials implies your understanding and acceptance of these reasonable terms. If you do not agree, for any reason, please do not purchase or use our lifecast, sculpture, mold making or other arts & crafts products.
The information contained in this document is given in good faith based on our current knowledge. It is only an indication and is in no way binding, particularly as regards infringement d or prejudice to third party rights through the use of our products. MSW GUARANTEES THAT ITS PRODUCTS COMPLY WITH ITS SALES SPECIFICATIONS. This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use. Users are responsible for ensuing compliance with local legislations and for obtaining the necessary certifications and authorizations. Users are requested to check that they are in possession of the latest version of this document.
Contact MSW Creative Works by mail, eMail, telephone or fax via the Company Information shown by clicking our logo on any page.
Thank you for visiting www.lifecast.net.