BODY PARTSâ„¢: LifeCastâ„¢ Kits & Materials:
Material Safety Data Sheet (MSDS)

WebSite Map
Successful Creativity Guaranteeâ„¢
Wholesale Terms and Pricing
Credit Application
Mail Order Sheet

Key Legend Information:

ACGIH: American Conference of Governmental Industrial Hygienists
OSHA: Occupational Safety and Health Administration
TLV: Threshold Limit Value
PEL: Permissable Exposure Limit

PDF Version

TWA: Time Weighted Average
TEL: Short Term Exposure Limit
NTP: National Toxicology Program
IARC: International Agency for Research on Cancer
ND: Not determined

Our art materials are sold as both stand alone products and as components of various consumer, novelty and educational kits. They have been developed with the highest concern for safety and ease of use within the context of the art materials industry.

The information contained herein is provided in good faith and is believed to be correct. However, MSW Creative makes no representation as to the comprehensiveness or accuracy of the information. It is expected that individuals receiving the information will exercise their own judgment in determining its appropriateness for a particular purpose.

Accordingly, we will not be held responsible for damages of any kind resulting from the use of or reliance upon such information.

No representations or warranties, either expressed or implied of merchantability, of fitness for a particular use or of any other nature are made hereunder with respect to the information set forth herein or to the product(s) to which it refers.

We will replace or refund the purchase price of said product, at our sole discretion only when shown to have been defective at the time of purchase.

ArtFormâ„¢: Single Part Original Lifecastâ„¢ Compound
Earthium(f/x)â„¢: Two Part Advanced LifeCastâ„¢ Compound

ArtFormâ„¢ (ID#1150/1/2/3) : Also a component of BODY PARTSâ„¢ kits:
• LifeCast™ Kits (ID#1120)
• ChildCast™ Kits (ID#1110)
• Educator's StudioPak (ID# 1140).
Also Known As:
• Earthium™ (ID#10060/1/2/3) although chemical ratios and arrangement is considerably different.

Health Hazard Information:

Inhalation: May cause irritation if PEL is exceeded (large air born quantities or direct inhalation)
Ingestion: No known hazard in reasonable quantities.
Direct Eye Contact: May cause irritation, flush area with water for 15 minutes. Call physician.
Toxicity: No harm via exposures of normal use; harmful only due to overwhelming dose or unusual conditions.
Acute Hazards: None
Chronic Hazard: In excess of PEL can result in silicosis, a non-cancerous lung disease.
Carcinogenicity: N/A, no product ingredient listed by NTP, IARC or OSHA.

Precautions for Safe Use:

As part of good hygiene and safe artistic practice avoid prolonged or unnecessary exposure to the material. Do not swallow the dry powders. Avoid prolonged inhalation of dust.
Disposal: Dispose of in accordance with local, state and federal regulations. Biodegradable.

Occupational Control Measures:

Dust/Particulate Mask:Yes, In excess of PEL

Principal Hazardous Components:

Diatomaceous Earth (may contain up to 60% crystalline silica as cristobalite): PEL/TLV: 10 mg/cubic meter

Physical/Chemical Characteristics:

Appearance and Odor: Dry powder with scent of varying color and final viscosity.
Chemical Group and Water Solubility: A gel former.
Flammability: Not considered to be a fire or explosive hazard. Extinguisher media A B C.

Reactivity Data:

Hazardous Decomp Products: Fluoride compounds at high temperatures. Stable with no hazardous polymerization occurrence.

ArtCastâ„¢: High Strength Statuary Cement

ArtFormâ„¢ (ID#1150/1/2/3) : Also a component of BODY PARTSâ„¢ kits:
• LifeCast™ Kits (ID#1120)
• ChildCast™ Kits (ID#1110)
• Educator's StudioPak (ID# 1140).

Other Trade Names: Hydrocal White manufactured by United States Gypsum.
Health Hazard Information:
Inhalation: Dust considered nuisance. Use NIOSH respirator if above TLV (large air born quantities).
Ingestion: Hardens when wetted and if ingested may result in obstruction. CALL PHYSICIAN IMMEDIATELY!
Direct Eye Contact: Flood with water for 15 minutes.
Specific Gravity: (H2O=1): 2.7
Toxicity: No harm via exposures of normal use.

Precautions for Safe Use:

As part of good hygiene and safe artistic practice avoid prolonged or unnecessary exposure to the material. Do not swallow the dry powders. Avoid prolonged inhalation of dust.
Precautions: May cause irritation of eyes and skin. May develop sufficient heat to cause burns if a large mass is kept in contact with skin while hardening. Remove from skin and clothes by washing off before hardening.
Disposal: Dispose of in accordance with local, state and federal regulations. Slurry may plug drains.

Occupational Control Measures:

Dust/Particulate Mask: Yes, In excess of TLV

Principal Hazardous Components:

Portland Cement (3% – 4%): TLV: 10 mg/M3 (ACGIH, 1981 – 5 mg/M3 respirable)

Physical/Chemical Characteristics:

Appearance and Odor: White, odorless powder with varying final viscosity.
Chemical Group & Water Solubility: Calcium Sulfate Hemihydrate with 0.2% solubility. NOT COMBUSTIBLE.

Reactivity Data:

Hazardous Decomp Products: Stable with no hazardous polymerization occurrence.

PolyArtâ„¢: Silicone Elastomer

PolyArtâ„¢ Elastomers / Silicone (ID# 1180/81)
Also a component of:
BODY PARTSâ„¢: Advanced LifeCastâ„¢ Kits (ID #1130)

Product & Chemical Name:

• POLYDIMETHYLSILOXANE, HYDROXY TERMINATED /
• POLY(DIMETHYL)SILOXANE / SILICA
• CAS Reg Number: 70131-67-8 / 63148-62-9 / 7631-86-9
• OSHA Hazard & Percentage: N > 35 / N < 35 / N < 25

Health Hazard Information:

Warning Statements: This product, as sold, does not meet the regulatory definition of a hazardous material. This product contains dimethylpolysiloxane which can generate formaldehyde as a byproduct of oxidative thermal decomposition beginning at approximately 150 C (300 F). Exposure to formaldehyde can cause adverse effects such as skin and respiratory sensitization and eye and throat irritation. Formaldehyde is a potential cancer hazard. evaluate and control exposure to formaldehyde when warranted by conditions of use.

Potential Health Effects:

Acute Eye: Slightly irritating. May cause redness, irritation.
Acute Skin: Non-irritating.
Acute Inhalation: Inhalation not likely.
Acute Ingestion: Ingestion not likely. Low acute oral toxicity.

Potential Health Effects (Cont.):

Chronic Effects: This product does not contain any ingredient designated by IARC, NTP, ACGIH or OSHA as probable or suspected human carcinogens.
Disposal: Dispose of in accordance with local, state and federal regulations.
First Aid Measures: See next page.
Precautions: As part of good hygiene and safe artistic practice avoid prolonged or unnecessary exposure to the material. Do not swallow. Avoid prolonged inhalation of fumes.
Fire Hazard Data: Fire Hazard - NO
• Acute Health Hazard - NO
• Chronic Health Hazard - NO
STATE REGULATIONS: This product does not contain any components that are regulated under California Proposition 65.
Flash Point: > 93 C (200 F). Flammability Class: WILL BURN.

Extinguishing Media:

Recommended: dry chemical, foam, carbon dioxide.
Special Fire Fighting Procedures: Firefighters should wear NIOSH/MSHA approved self-contained breathing apparatus and full protective clothing. Cool containers exposed to fire with water.
Unusual Fire and Explosion Hazards: Product will burn under fire conditions.
Hazardous Decomposition Materials (Under Fire Conditions): formaldehyde, oxides of carbon, silica (crystalline)PHYSICAL AND CHEMICAL PROPERTIES

Physical/Chemical Properties:Physical Appearance: translucent viscous liquid.
Odor: slight odor.
pH: Not Applicable
Specific Gravity: 1.11 at 25 C (77 F).
Water Solubility: insoluble
Melting Point Range: Not Available
Boiling Point Range: > 315 C (599 F) at 760 mmHg
Evaporation Rate: < 1 (Butyl Acetate = 1)
Materials/Chemicals To Be Avoided: strong bases, strong acids, strong oxidizing agentsThe Following Hazardous Decomposition Products Might Be Expected:
• Decomposition Type: thermal, dimethylcyclosiloxanes, methylphenylcyclosiloxanes
• Decomposition Type: oxidative/thermal/formaldehyde
• Hazardous Polymerization Will Not Occur.

First Aid for Accidental:

Accidental Release Measures:

Other Information:

NOTES TO PHYSICIAN:

All treatments should be based on observed signs and symptoms of distress in the patient. Consideration should be given to the possibility that overexposure to materials other than this product may have occurred.

Treat symptomatically. No specific antidote available.

Eye Exposure: In case of contact, immediately absorb excess with clean absorbent cloth or cotton. Then, hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. Seek medical attention if irritation develops or persists or if visual changes occur.
Skin Exposure: Immediately wipe excess material off skin with a dry cloth; then wash skin with plenty of soap and water. Seek medical attention if irritation develops or persists.
Inhalation: If respiratory irritation or distress occurs remove victim to fresh air. Seek medical attention if respiratory irritation or distress continues.
Ingestion: If victim is conscious and alert, give 1-2 glasses of water to drink. Do not give anything by mouth to an unconscious person. Seek medical attention. Do not leave victim unattended.

TOXICOLOGICAL INFORMATION:

Chronic Toxicity: This product does not contain any substances that are considered by OSHA, NTP, IARC or ACGIH to be "probable" or "suspected" human carcinogens.
Under certain conditions, this product may generate formaldebyde as a byproduct of oxidative thermal decomposition. Formaldehyde is listed as a potential human carcinogen by IARC, OSHA and ACGIH.

Evacuation Procedures and Safety: Wear appropriate protective gear for the situation. See Personal Protection information in Section 8. CAUTION: Spilled material may make the floor slippery. Do not leave traces of product on floors, ladders, etc., as this may present a slipping hazard.
Containment of Spill: Follow procedure described below under Cleanup and Disposal of Spill.
Cleanup and Disposal of Spill: Absorb with an inert absorbent. Scrape up and place in appropriate closed container (see Section 7: Handling and Storage). Clean up residual material with an appropriate solvent like paint thinner or mineral spirits, provided that there is good ventilation and no sources of ignition.
Environmental and Regulatory Reporting: Do not flush to drain.

National Fire Protection Association Hazard Ratings--NFPA(R):
O Health Hazard Rating--Minimal
1 Flammability Rating--Slight
O Instability Rating--MinimalNational Paint & Coating Hazardous Materials Identification System--HMIS(R):
0 Health Hazard Rating--Minimal
1 Flammability Rating--Slight
0 Reactivity Rating--MinimalHANDLING AND STORAGE:
Storage: Store in tightly closed containers. Store in an area that is clean, dry, well-ventilated area.
• EPA Hazardous Waste - NO

Site Map • FAQs • Products • LifeCast™Library • Support • Contact • Legal Information
© 1987 –2009 MSWinn. All rights reserved. Thank you for visiting lifecast.net